Quad Safety Harness Storage Holder
Yacht DapperĀ® Safety Harness Storage Holder is adaptable with PetzlĀ® harnesses and any other standard safety harnesses used within the yachting industry. Designed to enable the harnesses to sit along and out of the bulkhead (or door) of wash-lockers.
€ 115.00
More Info
User Manual
Product Stencil
It is recommended to install all Yacht DapperĀ® storage holders onto a backboard template with a minimum of 15-20mm in thickness, designed to the measurements of your bulkhead (or door) of your wash-locker. You will need a Yacht DapperĀ® drill bit and tapping bit in order for installation of all storage holders to be possible.
- Collections: PetzlĀ®, and more.
- Type: Quad Safety Harness Storage Holder
- Material: PVC, White
- Measurements: 315x200x200mm
- Weight: 0.92kg
Whatās in the box:
- Quad Safety Harness Storage Holder
- 2 x stainless steel M6x40 bolt
- 4 x stainless steel M6x20 bolt
- 5 x male clip
- 5 x female clip
IMPORTANT: You will need a Yacht Dapper drill bit and tapping bit for installation of all storage holders.
Drill Bit
Designed to enlarge your 10mm pilot hole to 16.8mm, this bit creates the perfect opening for fitting Yacht DapperĀ® Female clips securely into your bulkhead/doorās backboard template.
Tapping Bit
Once the 16.8mm hole is prepared using our Yacht DapperĀ® Female drill bit, use this tapping bit to drive the Female clips firmly into place, ensuring a reliable and professional finish.
