Triple Product Bottle Storage Holder
Yacht DapperĀ® Product Bottle Storage Holders are adaptable for any standard spray or product bottles used within the yachting industry. Designed to enable the bottles to sit flush with the bulkhead (or door) of wash-lockers.
€ 105.00
More Info
User Manual
Product Stencil
It is recommended to install all Yacht DapperĀ® storage holders onto a backboard template with a minimum of 15-20mm in thickness, designed to the measurements of your bulkhead (or door) of your wash-locker. You will need a Yacht DapperĀ® drill bit and tapping bit in order for installation of all storage holders to be possible.
- Collections: GardenaĀ®, CholliniteĀ®, Chemical GuysĀ®, AwlgripĀ®, and more.
- Type: Triple Product Bottle Storage Holder
- Material: PVC, White
- Top piece measurements: 340x139x45mm
- Bottom piece measurements: 340x139x45mm
- Weight: 1.05kg
Whatās in the box:
- Triple Product Bottle Storage Holder
- 8 x stainless steel M6x35 bolt
- 8 x male clip
- 8 x female clip
- Product stencil
IMPORTANT: You will need a Yacht Dapper drill bit and tapping bit for installation of all storage holders.
Drill Bit
Designed to enlarge your 10mm pilot hole to 16.8mm, this bit creates the perfect opening for fitting Yacht DapperĀ® Female clips securely into your bulkhead/doorās backboard template.
Tapping Bit
Once the 16.8mm hole is prepared using our Yacht DapperĀ® Female drill bit, use this tapping bit to drive the Female clips firmly into place, ensuring a reliable and professional finish.
